Accessory

Bro Block

£49

Fits to the luggage mount of your bike, putting your Power Pack lower down, giving a more balanced ride and seamless fold. Compatible with AIR/MAX/MAX+/MAX++.

Find out how the Bro Block is installed here.

Compatibility

AIR, MAX, MAX+, MAX++

You might also like

Universal Pedal Sensor For Bromptons

£35

If your Brompton bike doesn't fall within the range where the Brompton-specific magnetic discs fit, you can use the universal pedal sensor setup instead. If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers, but the arm must be used to secure it in place.

Twist Throttle

£29

Our throttle is compatible with all Swytch Kits and fits by sliding onto your handlebars. They're compatible with most standard handlebars, except drop bars.   When you’re not pedalling, the throttle activates in “walk mode,” providing a gentle push at a speed of up to 6 km/h - perfect for starting off after stopping at a traffic light.   While pedalling, engaging the throttle boosts the motor power to PAS level 5. This is particularly helpful when you’re riding in a battery-saving mode (e.g. PAS level 1) and approaching an incline, providing an instant power boost. Find the Twist Throttle manual here.

Universal Pedal Sensor

£30

If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers, but the arm must be used to secure it in place.

Arm Upgrade For Standard Pedal Sensor

£6

Premium Bike Toolkit

£35

3x Tyre Levers
5 Part Tube Repair Kit
3x Multi-Spanners
1x Chain Whip
1x Chain Braker/Maker
1x Pedal Arm Remover
1x Bottom Bracket Remover
1x Allen Key Set
1x Long Arm Allen Key (for pedal arm caps)
1x Spoke Multi-Wrench

Handlebar Mount for AIR/MAX

From £175

Extension Cable/s

From £15

Pedal Sensor For Brompton

£35

If your Brompton bike doesn't fall within the range where the Brompton-specific magnetic discs fit, you can use the universal pedal sensor setup instead. If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers. Does not include an arm (optional).

LED Display

£30

Seat Post Adaptor

£39